Ukko Saunas and Cedar Hot Tubs Blog

Archive for the ‘RORO series installations’ Category

We put together some pictures and explanation on how to install RORO series roof package for outdoor use. In this example RORO R2520 (2.5x2m) sauna has been installed in Pymble, NSW. Just follow the steps below to properly install the roof.

1. Install the actual RORO sauna as explained in previous article here…

2. Place roof beams and roof bearers as shown on the pictures below:

3. Insert 2d layer of roof beams and bearers as shown below:

4. Place fascia boards on top of the roof bearer:

5. Install middle roof bearer:

Note: Some minor chiseling might be required in order to properly fit middle bearer. We remove less material rather than more to ensure a tight fit.

6. Nail fascia boards on both sides and middle bearer to ensure roof stability:

7. Tamp T&G roof boards with rubber mallet and nail them to the middle and side bearers as shown below:

8. Place shingles supplied:

That’s it your sauna is fully installed and ready to be used.

Bookmark This

Ukko Saunas RORO series traditional hot-rock log saunas can
be adopted for use with wood burning heater. Patrick, one of our
customers agreed to provide us with pictures of this installation. He
used “COONARA” compact second hand wood fired heater with small
modifications to install in to his R2017 sauna:

“The sauna works perfect giving strong and comfortable heat. It
heats up virtually within 15-20 minutes. My wife and me are enjoying
our sauna very often!” – Said Patrick.

Bookmark This

Powered by ScribeFire.

Bookmark This