Archive for the ‘Barrel Saunas’ Category

Ukko Cedar Barrel Sauna

Ukko Cedar 2.4m long at 1.8m dia barrel sauna is going to Gold Coast, QLD

It is Saturday but we had to work and finish test fit of our popular Canadian Western Red Cedar barrel sauna.

Maxim, our customer, is coming over tomorrow to pick it up and we had to make sure that it’s all fitted properly :).

Ukko Barrel sauna assembly

Sauna is half way done. Base staves are in. Front and back walls are in too..

Ukko Barrel sauna assembly

The same half way through sauna but from another angle..

Customer ordered traditional sauna door. The reason is that his house does not have enough power for 8kW electric sauna heater and maximum he can go for is only 6.0Kw.

Traditional timber door holds heat much better (a bit of cost but way less than upgrading house power supply).

Ukko traditional sauna door

Traditional sauna door is mounted to the door jamb..

As always, all our saunas are fitted with two benches along sauna walls:

Ukko barrel sauna top view

Sauna benches are fitted along with floor duck board and heater guard rail..

Still few staves to go and maybe no need for filler stave:

Ukko Barrel sauna assembly

Ooh.. just a bit more to go..

Well, filler stave it is and sauna is done:

Ukko barrel sauna

Sauna is finally done and dusted. Ready to be picked up and go to its new home..

We always get questions like how much..

Here it is with traditional door 1.8m dia at 2.4m length, electric heater with built-in controls, heater guard rail, two benches, floor duck board, air vents, sauna light fitting, sauna cradle, bucket, ladle and thermometer – $12,490.

Want to order yours? Call us on:

0425 230 785

Ukko barrel sauna

2.7m long Ukko Cedar barrel sauna with overhang, curved traditional door with round window and front seat to relax after sauna session

We are packing this custom made sauna for a client in Brisbane. It features 600mm overhang, front seat, and big window at the back for relaxing views:

Barrel sauna back wall

Window at the back sauna wall for scenic views

This is how this barrel sauna looks from inside:

Barrel sauna inside

Two benches along each sauna sides with Cedar head rests

Sauna front with towel

Look, we’ve hang the towel to make it look more inviting 🙂

Oh, and it will be supplied with electric heater and bitumen shingles to protect it from the rain

Want to order your sauna today? Call us on 0425 230 785 for more information.






Ukko barrl sauna

1.8m dia at 1.8m length Ukko Cedar barrel sauna

We just finished refurbishing our 1.8m long Cedar barrel sauna. This sauna was used by us in Sydney before moving to Sussex Inlet.

In case you are wondering how we deliver it – simple, we flat pack it on to a made pallet for courier pickup this week:

Flat packed sauna on a pallet.

All of the barrel sauna is inside this cute box 🙂

While we were test fitting this sauna for customer in Torquay, VIC, we decided to show you how to assemble front and back wall of our barrels.


Barrel front wall assembly

Lay all 3 wall parts and connect them together to make a perfect circle

Once all wall parts are together, simply screw them with supplied hex screws.


It is very similar to front wall except that there’s one more extra detail.

Step 1 - back wall assembly

Step 1- Lay barrel sauna back wall parts

Step 2 - back wall assembly

Step 2 – Connect all parts together. (You can use rubber mallet)

Step3 - back wall assembly

Step 3 – Screw all parts together with supplied hex screws

Note: In this image all parts are separate. This is just to show you where the parts need to be screwed together. Make sure that all wall components are tight together (the same as front wall)

Step 4 - back wall assembly

Step 4 – Attach back wall support panel where marked and screw it down to the back wall

That’s all there’s to it. Any questions, please contact us for more information.